Designed for rubber plied and PVC solid woven belting, and for worn belts unfit for vulcanized splices, the Flexco^® SR™ Scalloped Edge™ fastener features a low profile that significantly reduces the fastener’s exposure to cleaner blades, skirt rubber, and return idlers. The staggered rivet pattern also provides maximum holding ability by allowing the rivets to pass between the carcass fibers without damaging them.

A built-in viewport simplifies fastener positioning. And self-setting rivets are installed from the top side of the belt for faster installation.

Hinged construction makes Rivet Hinged fasteners ideal for applications requiring frequent belt-length alterations, the joint can be separated simply by removing the hinge pin. A variety of hinge pins are available to match your application.

A variety of Flexco SR Scalloped Edge fasteners are available for belts with a mechanical fastener rating up to 2000 PIW (350 kN/m). In addition, the fasteners, hinge pins and rivets are all available in a variety of materials.

New to this fastener family is the R9, designed for the most demanding high-tension or thick belt applications. R9 has a greater reachback, a thicker plate and an enhanced loop area to accomodate a larger diameter hinge pin. Designed for mainline and panel belts with mechanical fastener ratings up to 2000 P.I.W. (350 kN/m). Also designed for thick belts 5/8"-1" (16-25.5 mm) used in front of chute transfer points and for other high tension impact applications.